HS8011 AKTIVATECH 2-port Gigabit PoE Extender 1x 10/100/1000M 95W PD IN + 1x 10/100/1000M 60W PSE OUT
- PoE Gigabit Extender
- Hardened 2 port PoE extender with Giga 95W PD IN to Giga 60W PSE OUT
- Can be cascaded up to 4 units or 500 meters at PD input 56V
- Operating temp.: -40°C to +75°C Wide Range Temperature
- DIN-Rail, Wall Mount
Specification
|
IEEE Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3af for PoE IEEE 802.3at for PoE+ |
|
|
Switch Architecture |
Back-plane (Switching Fabric): 4Gbps |
|
|
Data Processing |
Store and forward |
|
|
Flow Control |
IEEE 802.3x Flow Control and Back Pressure |
|
|
Jumbo Frame |
9KB |
|
|
MAC Address Table Size |
2K |
|
|
Packet Buffer Size |
1Mbits |
|
|
Network Connector |
1 x RJ-45 95W PD 10/100/1000M, 1 x RJ-45 60W PSE 10/100/1000M Auto negotiation, Auto MDI/MDI-X function, Full/Half duplex |
|
|
Network Cable |
UTP/STP Cat.5e or above Cable |
|
|
EIA/TIA-568 (100m) |
||
|
Protocol |
CSMA/CD |
|
|
LED |
PoE OUT (Green): ON－PSE is activated and PD is detected PD IN (Green): ON－Power is detected OFF－Power is not detected LNK (Green): ON－TX port is detected Flashing－TX data is transmitting/receiving SPEED(Amber) : ON－Giga Speed is detected |
|
|
Reserve Polarity Protection |
Present |
|
|
Overload Current Protection |
Present |
|
|
Power Consumption |
2.7W without PoE load |
|
PD Power Input |
15W/30W/60W/95W |
|
PoE Power |
15W/30W/60W per PSE Maximum total PSE power output 60W |
|
Operating Temperature |
-40°C to 75°C |
|
Operating Humidity |
5% to 95% (non-condensing) |
|
Storage Temperature |
-40°C to 85°C |
|
MTBF (mean time between failure) |
551,848.74 hours (Telcordia (Bellcore), GB) at 50°C |
|
Housing |
Rugged Aluminum, IP30 Protection |
|
Case Dimension (LxWxD) |
103.5 x 32 x 81.5 mm (LxWxD) |
|
Installation |
DIN Rail and Wall Mount options included |
|
Certifications |
|
|
Safety |
LVD (EN 62368-1) |
|
EMC |
CE, FCC, EN 55032/35 |
|
EMI |
CISPR 32, FCC Part 15B Class A |
|
EMS |
IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV |
|
Vibration |
EN 60068-2-6 |
|
Shock |
EN 60068-2-27 |
|
Free Fall |
EN 60068-2-32 |