HI8022-bt AKTIVATECH 2 channel PoE Injector
- Industrial 2 channel PoE Injector
- 2x 10M/100M/1000M 802.3af/at TX PSE
- 2x 10M/100M/1000M TX
- Input Voltage: 48-56VDC
- Operating temp.: -40°C to +75°C
- Wide Range Temperature
- DIN-Rail
- Wall Mount
Specification
|
IEEE Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3af for PoE IEEE 802.3at for PoE+ |
|
|
Network Connector |
2xRJ-45 10M/100M/1000M BaseT Data 2xRJ-45 10M/100M/1000M baseT Data with PoE Output Power |
|
|
Network Cable |
UTP/STP above Cat.5e Cable |
|
|
EIA/TIA-568 (100m) |
||
|
Protocol |
CSMA/CD |
|
|
LED |
PW1 (Green): ON - Power 1 is connected PW2 (Green): ON - Power 2 is connected PoE1 (Green): ON - PD detected and connected PoE2 (Green): ON - PD detected and connected |
|
|
PoE Pin Assignmen |
Pin 1 (V-), 2 (V-), 3 (V+), 6 (V+) Pin 4 (V+), 5 (V+), 7 (V-), 8 (V-) |
|
|
Reserve Polarity Protection |
Present |
|
|
Overload Current Protection |
Present |
|
|
Power Supply |
PW1 and PW2 for Redundant Dual DC 48V-56V |
|
|
Power Consumption |
TBA@52 VDC Without PoE |
|
|
PoE Power |
Maximum 30W |
|
|
PoE surge protection |
2KV |
|
|
Removable Terminal Block |
Provide 2 Redundant power, 4 Pin Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
|
Operating Temperature |
-40°C to 75°C |
|
Operating Humidity |
5% to 95% (Non-condensing) |
|
Storage Temperature |
-40°C to 85°C |
|
MTBF (mean time between failure) |
TBA (Telcordia (Bellcore), GB) at 50°C |
|
Housing |
Rugged Aluminum, IP30 Protection |
|
Case Dimension (LxWxD) |
103.5 x 32 x 81.5 mm (LxWxD) |
|
Installation |
DIN Rail Mount or Wall Mount |
|
Certifications |
|
|
Safety |
LVD (EN 62368-1) |
|
EMC |
CE, FCC, EN 55032/35 |
|
EMI |
CISPR 32, FCC Part 15B Class A |
|
EMS |
IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV |
|
Vibration |
EN 60068-2-6 |
|
Shock |
EN 60068-2-27 |
|
Free Fall |
EN 60068-2-32 |