HI8011A AKTIVATECH Gigabit PoE Injector Mode A, 1x 10/100/1000M 30W PSE TX + 1x 10/100/1000M TX
- 30Watts, Mode A, Industrial Gigabit PoE Injector
- 1x 10/100/1000M TX PSE + 1x 10/100/1000M TX
- 48-56VDC power input
- Operating temp.: -40°C to +75°C Wide Range Temperature
- DIN-Rail, Wall Mount
Specification
|
IEEE Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3af for PoE IEEE 802.3at for PoE+ |
|
|
Network Connector |
1xRJ-45 10/100/1000BaseT(X) Data 1xRJ-45 10/100/1000BaseT(X) Data with PoE output power |
|
|
Network Cable |
UTP/STP above Cat.5e Cable |
|
|
EIA/TIA-568 10-ohm (100m) |
||
|
Protocol |
CSMA/CD |
|
|
LED |
PW1 (Green): ON－Power is detected PW2 (Green): ON－Power is detected Mode A (Green): For End-Span PoE power 1,2,3,6 Mode B (Green): Reserved |
|
|
PoE Pin Assignment |
Mode A model, V+, V+, V-, V- for pin 1, 2, 3, 6 |
|
|
Reverse Polarity Protection |
Present |
|
|
Overload Current Protection |
Present |
|
|
Power Supply |
Redundant Dual DC 48V-56V power input PoE power input 48-56VDC |
|
|
Power Consumption |
1 W@48 VDC full load, Without PoE |
|
|
PoE power |
Max total PoE power 36watts at 56VDC input |
|
|
Removable Terminal Block |
Provide 4 pin terminal block Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
|
|
Operating Temperature |
-40°C to 75°C |
|
|
Operating Humidity |
5% to 95% (Non-condensing) |
|
|
Storage Temperature |
-40°C to 85°C |
|
|
MTBF (mean time between failure) |
>500,000 hrs (MIL-HDBK-217F) at 25°C |
|
|
Housing |
Rugged Aluminum, IP30 Protection |
|
|
Case Dimension (L X W X D) |
103.5 x 32 x 81.5 mm (L x W x D) |
|
|
Installation |
DIN Rail and Wall Mount options included |
|
UL 60950-1 |
|
|
Safety |
IEC (EN62368-1) |
|
EMC/EMS |
CE, FCC, EN55032/35, VCCI |
|
EN 60068-2-6 |
Vibration |
|
EN 60068-2-27 |
Shock |
|
EN 60068-2-32 |
Free Fall |