HCS8011NSFP AKTIVATECH Gigabit PoE Media Converter, 1x 10/100/1000M 30W PSE TX + 1x 100/1000M SFP
- Hardened Industrial Gigabit Media Converter
- Supports power 1, power 2
- 1x 10/100/1000M TX 30W PSE + 1x 100/1000M SFP
- 48-56VDC power input operating temp.: -40°C to +75°C Wide Range Temperature
- DIN-Rail, Wall Mount
Specification
|
IEEE Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3z 1000Base-X Gigabit Ethernet IEEE 802.3x Flow Control and Back Pressure, IEEE 802.3af PoE IEEE 802.3at PoE+ |
|
|
Switch Architecture |
Back-plane (Switching Fabric): 4Gbps |
|
|
Data Processing |
Ports speed are the same: Converter mode Ports speed are not the same: Switch mode (store and forward) |
|
|
Flow Control |
IEEE 802.3x Flow Control and Back Pressure |
|
|
Jumbo Frame |
16KB |
|
|
MAC Address Table Size |
1K |
|
|
Packet Buffer Size |
512Kbits |
|
|
Network Connector |
1x RJ-45 10/100/1000BaseT(X) PSE with PoE Output power up to 30Watts 1x 100/1000M SFP |
|
|
Network Cable |
UTP/STP Cat.5e or above Cable |
|
|
EIA/TIA-568 (100m) |
||
|
Protocol |
CSMA/CD |
|
|
LED Indicators |
PW1 (Green): ON－Power 1 is detected PW2 (Green): ON－Power 2 is detected |
|
|
SFP LNK/ACT (Green): ON－FX port is detected Flashing－FX data is transmitting/receiving |
||
|
RJ-45 port LNK/ACT (Green): ON－TX port is detected Flashing－TX data is transmitting/receiving PoE (Amber): ON－PD is detected on designated port. OFF－no PD is detected. |
||
|
PoE Pin Assignment |
30 watts 2 pairs Mode A End Span V+, V+, V-, V- for pin 1, 2, 3, 6 |
|
DIP Switch Function |
DIP1: OFF－LFP disabled (Default) ON－LFP enabled DIP 2: OFF－SFP speed 1000M (Default) ON－SFP speed 100M Link Fault Pass Through (LFP) is when copper side signal lost or disconnect, fiber side link signal will actively off, when fiber side signal lost or disconnect, copper side link signal will also actively off. |
|
Reserve polarity protection |
Present |
|
Overload current protection |
Present |
|
Power Input |
Redundant Dual DC 48V-56V Power Input |
|
Power Consumption |
3Watts @48VDC full load |
|
PoE power |
Maximum 30W |
|
Removable Terminal Block |
Provide 4 pin terminal block Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
|
Operating Temperature |
-40°C to 75°C |
|
Operating Humidity |
5% to 95% (Non-condensing) |
|
Storage Temperature |
-40°C to 85°C |
|
MTBF (mean time between failure) |
>500,000 hrs (Telcordia (Bellcore), GB) at 50°C |
|
Housing Design |
Rugged Metal, IP30 Protection |
|
Case Dimension (L x W x D) |
103.5 x 32 x 81.5 mm (L x W x D) |
|
Installation |
DIN-Rail and wall mount brackets included |
|
Certifications |
|
|
Safety |
LVD(EN62368-1) |
|
EMC |
CE, FCC, EN 55032/35 |
|
EMI |
CISPR 32, FCC Part 15B Class A |
|
EMS |
IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV |
|
Vibration |
EN 60068-2-6 |
|
Shock |
EN 60068-2-27 |
|
Free Fall |
EN 60068-2-32 |