H8142F AKTIVATECH Rugged Industrial Switch 16 ports PoE+ 14x10/100/1000M 30W PSE + 2x1000M SFP
- Rugged Industrial 16 ports PoE+
- Switch designed with hardened Industrial PoE controller
- with 14x10/100/1000M 30W PSE + 2x1000M SFP
- Power 1, Power 2, and Power DIN (For external power adapter)
- Input Voltage: 48-56VDC Operating temp -40°C to 75°C Wide Range Temperature
- DIN-Rail, Wall Mount
Specification
|
IEEE Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Ethernet IEEE 802.3x Flow Control and Back Pressure, IEEE 802.3af PoE IEEE 802.3at PoE+ |
|
|
Switch Architecture |
Back-plane (Switching Fabric): 32Gbps |
|
|
Data Processing |
Store and Forward |
|
|
Flow Control |
IEEE 802.3x Flow Control and Back Pressure |
|
|
Jumbo Frame |
9KB |
|
|
MAC Address Table Size |
8K |
|
|
Packet Buffer Size |
4.1Mbits |
|
|
Network Connector |
14 x RJ-45 10/100/1000BaseT(X) auto negotiation, Auto MDI/MDI-X function, Full/Half duplex 14 x Gigabit PoE+ 802.3at/af PSE port, 30W per port 2 x SFP 1000M |
|
|
Network Cable |
UTP/STP Cat.5e or above Cable |
|
|
EIA/TIA-568 (100m) |
||
|
Protocol |
CSMA/CD |
|
|
LED |
PW1 (Green): ON－Power 1 is detected PW2 (Green): ON－Power 2 is detected PW3 (Amber): ON－Power 3 is detected for Power DIN RLY (Amber): ON－Connect only PW1 or PW2 OFF－Both PW1 and PW2 are connected |
|
|
TX/RJ-45 port: LNK (Link/Active) (Green): ON－TX port is detected Flashing －TX data is transmitting/receiving PoE (Amber): ON－PD is detected and PSE is activated OFF－PD is not detected |
||
|
SFP Fiber Per port: F15/F16 (Green) ON – F15 or F16 SFP fiber is detected Flashing – F15 or F16 SFP fiber is active |
||
|
Reserve Polarity Protection |
Present |
|
|
Overload Current Protection |
Present |
|
|
Power Supply |
Redundant Dual DC 48V-56V Power Input |
|
|
Power Consumption |
5.76W@48 VDC full load, Without PoE |
|
|
Alarm Relay Contact |
Relay outputs with current carrying capacity of 1 A @24VDC, Relay in open circuit mode when 2 powers are connected. in short circuit mode when only one power supply is connected |
|
|
PoE power |
PoE power per port 30watts. Maximum total power 300Watts with 56VDC input, Supports IEEE802.3af/at |
|
|
Removable Terminal Block |
Provide 2 Redundant power, Alarm relay contact, 6Pin Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
|
|
Operating Temperature |
-40°C to +75°C |
|
|
Operating Humidity |
5% to 95% (Non-condensing) |
|
|
Storage Temperature |
-40°C to 85°C |
|
|
MTBF (mean time between failure) |
504,739 hrs (Telcordia (Bellcore), GB) at 50°C |
|
|
Housing |
Rugged Metal, IP30 Protection |
|
|
Case Dimension |
155 x 48 x 120 mm (LxWxD) |
|
|
Installation |
DIN Rail and Wall Mount options included |
|
|
Safety |
LVD (EN62368-1) |
|
|
EMC |
CE, FCC, EN 55032/35 |
|
|
EMI |
CISPR 32, FCC Part 15B Class A |
|
|
EMS |
IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV |
|
|
Vibration |
EN 60068-2-6 |
|
|
Shock |
EN 60068-2-27 |
|
|
Free Fall |
EN 60068-2-32 |
|