H8082C-bt AKTIVATECH Rugged Unmanaged Industrial Switch 10 port Gigabit PoE++ 4x Gigabit TX 90W PSE +4x Giga 30WPSETX 2x 1000M TX/ SFP Combo
- Rugged Industrial 10 port Gigabit PoE Switch designed with hardened Marvell IC
- 4x Gigabit TX 90W 802.3bt PSE + 4x Gigabit TX 30W 802.3af/at PSE + 2x 1000M TX/ SFP Combo
- Support power 1, power 2, and power din (for external power adapter)
- Input Voltage: 48-56VDC
- Operating temp.: -40°C to +75°C Wide Range Temperature
- DIN-Rail, Wall Mount
Specification
|
IEEE Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af PoE IEEE 802.3at PoE+ IEEE 802.3bt PoE++ |
||||
|
Switch Architecture |
Back-plane (Switching Fabric): 20Gbps |
||||
|
Data Processing |
Store and Forward |
||||
|
Flow Control |
IEEE 802.3x Flow Control and Back Pressure |
||||
|
Jumbo Frame |
10KB |
||||
|
MAC Address Table Size |
11K |
||||
|
Packet Buffer Size |
2M |
||||
|
Network Connector |
10 x RJ-45 10/100/1000BaseT(X) auto negotiation, Auto MDI/MDI-X function, Full/Half duplex 4 x Gigabit 802.3bt PSE ports 4 x Gigabit 802.3at PSE ports 2 x SFP 1000M BaseX |
||||
|
Network Cable |
UTP/STP Cat.5e or above Cable |
||||
|
EIA/TIA-568 (100m) |
|||||
|
Protocol |
CSMA/CD |
||||
|
LED |
PW1(Power 1) -- Green PW2(Power 2) -- Green PW3(Power 3) -- Green for Power DIN RLY (Alarm Relay) -- Amber |
||||
|
TX/RJ-45 port: LNK(Link/Active) -- Green SPD(Speed) 10/100(Off), 1000 -- Amber P1~P8(PoE): PD detected and connected -- Green |
|||||
|
SFP Fiber Per port: Link -- Green Active -- Flash |
|||||
|
PoE Standard |
IEEE 802.3af/at PSE Port 1- 4 IEEE 802.3bt PSE Port 5 -8 |
||||
|
Reserve Polarity Protection |
Present |
||||
|
Overload Current Protection |
Present |
||||
|
Power Supply |
P1 and P2 for Redundant Dual DC 48V-56V P3 for Power DIN to connect external power adapter DC 48-56V 48VDC-56VDC for 30W 52VDC- 56VDC for 30W above |
||||
|
Power Consumption |
6.72W @48 VDC full load, Without PoE |
||||
|
Alarm Relay Contact |
Relay outputs with current carrying capacity of 1 A @24VDC Relay in “open” circuit mode when PW1 and PW2 are connected. In “short” circuit mode when only one power supply is connected |
||||
|
PoE Power |
Input Voltage 48VDC-56VDC 802.3bt PoE power per port 90watts with 56VDC input Maximum total power 360Watts with 56VDC input |
||||
|
Removable Terminal Block |
Provide 2 Redundant power, Alarm relay contact 6 Pin. And circular Power DIN for power adapter Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
||||
|
Operating Temperature |
-40°C to 75°C |
||||
|
Operating Humidity |
5% to 95% (Non-condensing) |
||||
|
Storage Temperature |
-40°C to 85°C |
||||
|
MTBF (mean time between failure) |
508,543 hrs (Telcordia (Bellcore), GB) at 50°C |
||||
|
Housing |
Rugged Metal, IP30 Protection |
||||
|
Case Dimension (LxWxD) |
155 x 48.2 x 120 mm (LxWxD) |
||||
|
Installation |
DIN Rail and Wall Mount options included |
||||
|
Certifications |
|||||
|
Safety |
LVD (EN62368-1) |
||||
|
EMC |
CE, FCC, EN 55032/35 |
||||
|
EMI |
CISPR 32, FCC Part 15B Class A |
||||
|
EMS |
IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV |
||||
|
Vibration |
EN 60068-2-6 |
||||
|
Shock |
EN 60068-2-27 |
||||
|
Free Fall |
EN 60068-2-32 |
||||