H8082C AKTIVATECH Rugged Unmanaged Industrial 10 port Gigabit PoE+ Switch 8x Gigabit TX 30W PSE + 2x 1000M TX/ SFP Combo
- Rugged Industrial 10 port Gigabit PoE+ Switch designed with hardened Marvell IC and hardened PoE controller.
- 8x Gigabit TX 30W PSE + 2x 1000M TX/ SFP Combo
- Support power 1, power 2, and power din (for external power adapter)
- Input Volage: 48-56VDC
- Operating temp.: -40°C to +75°C Wide Range Temperature
- DIN-Rail, Wall Mount
Specification
|
IEEE Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3af PoE IEEE 802.3at PoE+ |
|
|
Switch Architecture |
Back-plane (Switching Fabric): 20Gbps |
|
|
Data Processing |
Store and Forward |
|
|
Flow Control: |
IEEE 802.3x Flow Control and Back Pressure |
|
|
Jumbo Frame |
10KB |
|
|
MAC Address Table Size |
11K |
|
|
Packet Buffer Size |
2M |
|
|
Network Connector : |
8 x RJ-45 10/100/1000BaseT(X) auto negotiation, 8 x Gigabit PoE+
802.3at/af PSE port, 30W per port 2 x 1000M TX / SFP combo |
|
|
Network Cable |
UTP/STP Cat.5e or above Cable |
|
|
EIA/TIA-568 (100m) |
||
|
Protocol |
CSMA/CD |
|
|
LED |
Power P1 (Green)– ON: Power 1 is connected P2 (Green) – ON: Power 2 is connected P3 (Amber) – ON: Power 3 is connected RLY(Amber) – ON: Relay is activated (this means either P1 or P2 is not connected. RLY only works for P1/P2. RLY does not work with P3) |
|
|
TX/RJ-45 port: port 1 to port 8 AND port T9, T10 LNK (Link/Active) (Green) ON—TX port is detected Flashing – TX data is transmitting/receiving PoE (Amber) ON: PD detected on designated port |
||
|
SFP Fiber Per port: F9 / F10 (Green) ON – Port F9 or F10 SFP fiber is detected Flashing – Port F9 or F10 SFP fiber is active |
|
Reserve Polarity Protection |
Present |
|
Overload Current Protection |
Present |
|
Power Supply |
P1 and P2 for Redundant Dual DC 48V-56V P3 for Power DIN to connect external power adapter DC 48-56V For Switch only --- Power input range DC 12-56VDC For PoE --- Power input range 48-56VDC |
|
Power Consumption |
5.76W@48 VDC full load, Without PoE |
|
Alarm Relay Contact |
Relay outputs with current carrying capacity of 1 A @24VDC, Relay in “open” circuit mode when PW1 and PW2 are connected. in “short” circuit mode when only one power supply is connected |
|
PoE power |
Input Voltage 48VDC-56VDC. PoE power per port 30watts. Maximum total power 240Watts with 56VDC input |
|
Removable Terminal Block |
Provide 2 Redundant power, Alarm relay contact, 6 Pin. And circular POWER DIN for power adapter Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire(AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
|
Operating Temperature |
-40°C to 75°C |
|
Operating Humidity |
5% to 95% (Non-condensing) |
|
Storage Temperature |
-40°C to 85°C |
|
MTBF (mean time between failure) |
510,889 hrs (Telcordia (Bellcore), GB) at 50°C |
|
Housing |
Rugged Metal ,IP30 Protection |
|
Case Dimension (L x W x D) |
155 x 48 x 120 mm (LxWxD) |
|
Installation mounting |
DIN Rail and Wall Mount options included |
|
Certifications |
|
|
Safety |
UL 60950-1 |
|
Safety |
LVD (EN 62368-1) |
|
EMC |
CE, FCC, EN 55032/35 |
|
EMI |
CISPR 32, FCC Part 15B Class A |
|
EMS |
IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV |
|
Vibration |
EN 60068-2-6 |
|
Shock |
EN 60068-2-27 |
|
Free Fall |
EN 60068-2-32 |