H8080A AKTIVATECH Hardened Industrial Switch 8 port 10/100M POE+ with 8x10/100 30W PSE TX
- Hardened Industrial 8 port 10/100M POE+ Switch
- with 8x 10/100 TX 30Watts PSE
- 48-56VDC input voltage
- Operating temp.: -40 to 75°C Wide Range Temperature
- DIN-Rail, Wall Mount
Specification
|
IEEE Standard |
IEEE 802.3 10Base-T Ethernet IEEE802.3af PoE IEEE802.3at PoE+ |
|
|
Switch Architecture |
Back-plane (Switching Fabric): 1.6Gbps |
|
|
Data Processing |
Store and Forward |
|
|
Flow Control |
IEEE 802.3x Flow Control and Back Pressure |
|
|
MAC Address Table Size |
1K |
|
|
Packet Buffer Size |
1M |
|
|
Network Connector |
8xRJ-45 10/100BaseT(X) auto negotiation 8 x PoE+ 802.3at/af PSE port |
|
|
Network Cable |
UTP/STP Cat.5e or above Cable |
|
|
EIA/TIA-568 (100m) |
||
|
Protocol |
CSMA/CD |
|
|
LED |
PW1(Green): ON－Power is detected PW2 (Green): ON－Power is detected RLY(Relay) (Amber): ON－Connect only PW1 or PW2 |
|
|
TX/RJ-45 port: Lnk (Green): ON－TX port is detected Flashing－TX data is transmitting/receiving PoE (Amber): ON－PSE is activated and PD is detected Flashing－PSE is detected to PD |
||
|
Reserve Polarity Protection |
Present |
|
|
Overload Current Protection |
Present |
|
|
Power Supply |
Redundant Dual DC 48V-56V Power Input PoE input 48-56VDC |
|
|
Power Consumption |
5.76W@48 VDC full load, Without PoE |
|
|
Alarm Relay Contact |
Relay outputs with current carrying capacity of 1 A @24VDC, Relay in short circuit mode when 2 powers are connected in open circuit mode when only one power supply is connected |
|
|
PoE power |
PoE power per port 30watts. Maximum 36Watts Maximum total power 200Watts, Supports IEEE802.3af/at |
|
|
Removable Terminal Block |
Provide 2 Redundant power, Alarm relay contact ,6 Pin Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
|
Operating Temperature |
-40°C to 75°C |
|
Operating Humidity |
5% to 95% (Non-condensing) |
|
Storage Temperature |
-40°C to 85°C |
|
MTBF (mean time between failure) |
510,304 hrs (Telcordia (Bellcore), GB) at 50°C |
|
Housing |
Rugged Metal, IP30 Protection |
|
Case Dimension (L x W x D) |
142 x 36.2 x 105 mm (L x W x D) |
|
Installation mounting |
DIN-Rail and wall mount brackets included |
|
Certifications |
|
|
Safety |
LVD (EN62368-1) |
|
EMC |
CE, FCC, EN 55032/35 |
|
EMI |
CISPR 32, FCC Part 15B Class A |
|
EMS |
IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV |
|
Vibration |
EN 60068-2-6 |
|
Shock |
EN 60068-2-27 |
|
Free Fall |
EN 60068-2-32 |