D8082C AKTIVATECH Industrial 10-port non-PoE Giga Ethernet Switch, 8x 10/100/1000 TX + 2x 1000M TX/SFP Combo
- Rugged Industrial 10 port Gigabit Switch
- Designed with hardened Marvell IC and hardened components
- 8x10/100/1000M TX + 2 x 1000M TX/ SFP combo
- Support power 1, power 2, and power din (for external power adapter)
- Input Voltage: 12-56VDC
- Operating temp: -40°C to +75°C Wide Range Temperature
- DIN-Rail, Wall Mount
Specification
|
IEEE Standard |
IEEE 802.3 10Base-T Ethernet |
|
|
Switch Architecture |
Back-plane (Switching Fabric): 20Gbps |
|
|
Data Processing |
Store and Forward |
|
|
Flow Control: |
IEEE 802.3x Flow Control and Back Pressure |
|
|
Jumbo Frame |
10KB |
|
|
MAC Address Table Size |
16K |
|
|
Packet Buffer Size |
2M |
|
|
Network Connector |
8xRJ-45
10/100/1000BaseT(X) auto negotiation, 2 x 1000M TX / SFP combo |
|
|
Network Cable |
UTP/STP Cat.5e or above Cable |
|
|
EIA/TIA-568 10-ohm (100m) |
||
|
Protocol |
CSMA/CD |
|
|
LED |
PW1(Power 1) Green, PW2(Power 2) Green, PW3(Power 3) Amber for Power DIN RLY (Alarm Relay) Amber, |
|
|
TX/RJ-45 port: port 1 to port 8 Green --- LNK (Link/Active) TX/RJ-45 port: port T9 and port T10 Green – LNK (Link/Active) |
||
|
SFP Fiber Per port: Green --- Link/Active |
||
|
Reserve Polarity Protection |
Present |
|
|
Overload Current Protection |
Present |
|
|
Power Supply |
P1 and P2 for Redundant Dual DC 12V-56V P3 for Power DIN to connect external power adapter DC 12-56V |
|
|
Power Consumption |
5.76W@48 VDC full load |
|
Alarm Relay Contact |
Relay outputs with current carrying capacity of 1A @24VDC, Relay in “open” circuit mode when PW1 and PW2 are connected. in “short” circuit mode when only one power supply is connected. |
|
Removable Terminal Block |
Provide 2 Redundant power, Alarm relay contact, 6 Pin. And circular POWER DIN for power adapter. Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
|
Operating Temperature |
-40℃ to 75℃ |
|
Operating Humidity |
5% to 95% (Non-condensing) |
|
Storage Temperature |
-40℃ to 85℃ |
|
MTBF (mean time between failure) |
510,400 hrs (MIL-HDBK-217F) at 25°C |
|
Housing |
Rugged Aluminum, IP30 Protection |
|
Case Dimension (L x W x D) |
155mmx48mmx120mm (LxWxD) |
|
Installation mounting |
DIN Rail and Wall Mount Options Included |
|
Certifications: |
|
|
Safety |
LVD (EN62368-1) |
|
EMC/EMS |
CE, FCC, VCCI |
|
EMI |
FCC Part 15 Subpart B Class A, |
|
EMS |
IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV |
|
EN 60068-2-6 |
Vibration |
|
EN 60068-2-27 |
Shock |
|
EN 60068-2-32 |
Free Fall |