D8050 AKTIVATECH Industrial Gigabit non-PoE Switch 5 port Giga Ethernet Switch 5x 10/100/1000M TX
- Rugged Industrial 5 port Gigabit Ethernet Switch
- 5x 10/100/1000M TX
- Power Input 12VDC – 56VDC or 18VAC – 36VAC
- Operating temp.: -40°C to 75°C Wide Range Temperature
- DIN-Rail, Wall Mount
|
IEEE Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE802.3x Flow Control and Back Pressure |
|
|
Switch Architecture |
Back-plane (Switching Fabric): 10Gbps |
|
|
Data Processing |
Store and Forward |
|
|
Flow Control |
IEEE 802.3x Flow Control and Back Pressure |
|
|
Jumbo Frame |
9KB |
|
|
MAC Address Table Size |
2K |
|
|
Packet Buffer Size |
1Mbits |
|
|
Network Connector |
5xRJ-45 10/100/1000BaseT(X) auto negotiation, Auto MDI/MDI-X function, Full/Half duplex |
|
|
Network Cable |
UTP/STP Cat.5e or above Cable |
|
|
EIA/TIA-568 (100m) |
||
|
Protocol |
CSMA/CD |
|
|
LED |
PW1 (Green): ON－Power is detected PW2 (Green): ON－Power is detected |
|
|
TX/RJ-45 port: LNK (Link/Active) (Green) ON－TX port is detected Flashing－TX data is transmitting/receiving SPD (Amber): ON－1000M speed OFF－10/100M speed |
||
|
Reserve Polarity Protection |
Present |
|
|
Overload Current Protection |
Present |
|
|
Power Supply |
Redundant Dual Power Input 12VDC-56VDC or 18VAC-36VAC |
|
|
Power Consumption |
2.76W@48 VDC full load |
|
|
Removable Terminal Block |
Provide 2 Redundant power, 4 Pin Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire(AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
|
Operating Temperature |
-40°C to 75°C |
|
Operating Humidity |
5% to 95% (Non-condensing) |
|
Storage Temperature |
-40°C to 85°C |
|
MTBF (mean time between failure) |
553405.68 hrs (Telcordia (Bellcore), GB) at 50°C |
|
Housing |
Rugged Metal, IP30 protection |
|
Case Dimension (L x W x D) |
103.5 x 32 x 81.5 mm (L x W x D) |
|
Installation mounting |
DIN Rail and Wall Mount options included |
|
UL 60950-1 |
|
|
Safety |
LVD (EN62368-1) |
|
EMC/EMS |
CE, FCC, EN 55032/35, VCCI |
|
EMI |
FCC Part 15 Subpart B Class A |
|
EMS |
IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV |
|
Vibration |
EN 60068-2-6 |
|
Shock |
EN 60068-2-27 |
|
Free Fall |
EN 60068-2-32 |