D8042ACF AKTIVATECH Unmanaged Industrial Giga Ethernet Switch 6-port 4x 10/100/1000 TX, 1x 100/1000 SFP, 1x TX/SFP Combo
- Hardened Industrial 6 port Gigabit Ethernet Switch
- designed with hardened Marvell IC and hardened components
- 4x 10/100/1000M TX + 1x 100/1000M SFP + 1x SFP/TX Combo
- Support power 1, power 2, and power DIN (for external power adapter)
- Input Voltage: 12-56VDC
- Operating temp.: -40°C to +75°C Wide Range Temperature
- DIN-Rail, Wall Mount
Specification
|
IEEE Standard |
IEEE 802.3 10Base-T Ethernet |
|
|
Switch Architecture |
Back-plane (Switching Fabric): 12Gbps |
|
|
Data Processing |
Store and Forward |
|
|
Flow Control |
IEEE 802.3x Flow Control and Back Pressure |
|
|
Jumbo Frame |
9KB |
|
|
MAC Address Table Size |
1K |
|
|
Packet Buffer Size |
1M |
|
|
Network Connector |
5 x RJ-45
10/100/1000BaseT(X) auto negotiation, |
|
|
Network Cable |
UTP/STP Cat.5e or above Cable |
|
|
EIA/TIA-568 10-ohm (100m) |
||
|
Fiber Cable
(Multi-mode):50/125um,62.5/125um |
||
|
Protocol |
CSMA/CD |
|
|
LED |
PW1 (Green): ON－Power is detected PW2 (Green): ON－Power is detected PW3 (Amber): ON－Power is detected RLY (Amber): ON－Only PW1 or PW2 is connected OFF－Both PW1 and PW2 are connected |
|
|
TX/RJ-45 port: LNK (Green): ON－TX port is detected Flashing－TX data is transmitting/receiving |
||
|
SFP port (Green): ON－SFP port is detected Flashing－SFP data is transmitting/receiving |
||
|
DIP Switch |
DIP 1: OFF－Port 5 SFP (Default) ON－SFP Speed 100M |
|
|
Reserve Polarity Protection |
Present |
|
|
Overload Current Protection |
Present |
|
|
Power Supply |
Redundant Dual DC 12V-56V Power Input |
|
|
Power Consumption |
5.76W@48 VDC full load |
|
Alarm Relay Contact |
Relay outputs with current carrying capacity of 1 A @24VDC. Relay in “open” circuit mode when PW1 and PW2 are connected in “short” circuit mode when only one power supply is connected. |
|
Removable Terminal Block |
Provide 2 Redundant power, Alarm relay contact, 6 Pin. And circular POWER DIN for power adapter Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
|
Operating Temperature |
-40°C to 75°C |
|
Operating Humidity |
5% to 95% (Non-condensing) |
|
Storage Temperature |
-40°C to 85°C |
|
MTBF (mean time between failure) |
>500,000 hrs (MIL-HDBK-217F) at 25°C |
|
Housing |
Rugged Metal, IP30 Protection |
|
Case Dimension |
142 x 43 x 105 mm (L x W x D) |
|
Installation mounting |
DIN Rail and Wall Mount options included |
|
Certifications |
|
|
Safety |
UL 60950-1 |
|
Safety |
LVD (EN62368-1) |
|
EMC |
CE, FCC, EN 55032/24 |
|
EMI |
CISPR 32, FCC Part 15B Class A |
|
EMS |
IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 2KV; Signal: 2KV |
|
Vibration |
EN 60068-2-6 |
|
Shock |
EN 60068-2-27 |
|
Free Fall |
EN 60068-2-32 |